Tubular products for the field of landfill of refuse Executive Standards: GB/T13663 - 2000 Polyethylene (PE) Tubular Products for Water Supply, GB/T13663.2 - 2005 Polyethylene (PE) Piping System, the Second Part: Pipe Fittings, GB15558 Polyethylene Piping System for Combustion Gases. Scope of application: Transferring sewage and rainwater inside and outside the field of landfill of refuse and the percolating water, and conducting and exhausting gases
Executive Standards
GB/T13663 - 2000 Polyethylene (PE) Tubular Products for Water Supply, GB/T13663.2 - 2005 Polyethylene (PE) Piping System for Water Supply, the Second Part: Pipe Fittings, GB15558 Polyethylene Piping System for Combustion Gases.
Scope of application
Transferring sewage and rainwater inside and outside the field of landfill of refuse and the percolating water, and conducting and exhausting gases.
Characteristics
◆ Genuine green construction material--"Shunming" PE water supply piping possesses the health quality of non-toxicity, no scaling and no bacteria stemming and can avoid occurring of secondary pollution completely.
◆ Superexcellent corrosion-resisting property --It withstands the corrosions of a great variety of chemical mediators excepting a few strong oxidizers and has no electro-chemical corrosion.
◆ Long service life -- PE piping can be used safely for more than 50 years under rated temperature and pressure.
◆ Preferable resistance to impact--PE pipe has good toughness and high resistance to impact. Pipe will not be ruptured when the heavy load runs over the piping directly.
◆ Reliable link performance--The hot melt or electric melting joints of the pipe has the higher strength than the main body of the tubular product, disconnection of the joint will not happen under the action owing to induced soil movement or live load.
◆ Favorable workability -- Pipe is light, welding technology used is simple, construction is convenient and the comprehensive construction cost of the project is low.
|
Nominal outside diameter |
SDR26 |
SDR17.6 |
SDR13.6 |
SDR11 |
|
Nominal wall thickness |
Nominal wall thickness |
Nominal wall thickness |
Nominal wall thickness |
|
40 |
2.3 |
2.3 |
3 |
3.7 |
|
50 |
2.3 |
2.9 |
3.7 |
4.6 |
|
63 |
2.5 |
3.6 |
4.7 |
5.8 |
|
75 |
2.9 |
4.3 |
5.6 |
6.8 |
|
90 |
3.5 |
5.1 |
6.7 |
8.2 |
|
110 |
4.2 |
6.3 |
8.1 |
10 |
|
125 |
4.8 |
7.1 |
9.2 |
11.4 |
|
140 |
5.4 |
8 |
10.3 |
12.7 |
|
160 |
6.2 |
9.1 |
11.8 |
14.6 |
|
180 |
6.9 |
10.2 |
13.3 |
16.4 |
|
200 |
7.7 |
11.4 |
14.7 |
18.2 |
|
225 |
8.6 |
12.8 |
16.6 |
20.5 |
|
250 |
9.6 |
14.2 |
18.4 |
22.7 |
|
280 |
10.7 |
15.9 |
20.6 |
25.4 |
|
315 |
12.1 |
17.9 |
23.2 |
28.6 |
|
355 |
13.6 |
20.1 |
26.1 |
32.2 |
|
400 |
15.3 |
22.7 |
29.4 |
36.3 |
|
450 |
17.2 |
25.5 |
33.1 |
40.9 |
|
500 |
19.1 |
28.3 |
36.8 |
45.4 |
|
560 |
21.4 |
31.7 |
41.2 |
50.8 |
|
630 |
24.1 |
35.7 |
46.3 |
57.2 |
